Protege 1999-2000

Windshield Wiper Systems

Print

Removal & Installation



Wiper Motor
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the windshield wiper arm cap, nut and the arm and blade assembly.
  4.  
  5. Remove the caps, screws and weatherstripping, then remove the cowl grille.
  6.  
  7. Remove the bolts and the cowl panel.
  8.  
  9. Pry off the connection between the windshield wiper motor and windshield wiper link
  10.  
  11. Disconnect the windshield wiper motor connector, remove the bolt and motor.

    Click image to see an enlarged view

    Fig. Front wiper motor assembly-Protégé

  12.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo