Quest 1995-1996

Assembly Line Diagnostic Link or Data Link Connector

Print

General Information & Location



There are two types of data link connectors (DLC) used on 1993-00 vehicles. One connector is for the factory scan tool, which requires an adapter for generic scan tool use. The other connector conforms to On Board Diagnostic II (OBD-II) standards, and will accept a generic/OBD-II scan tool connector.



On 1993-95 vehicles, the factory data link connector is located behind the interior fuse panel cover, beneath the fuse block. There is no OBD-II data link connector.
 
On 1996-00 vehicles, the factory DLC is located behind the interior fuse panel cover, above the fuse block. The OBD-II data link connector is located under the dash on the driver-s side.

Click image to see an enlarged view

Fig. Factory data link connector location-1993-95 vehicles



Click image to see an enlarged view

Fig. Factory data link connector location-1996-00 vehicles



Click image to see an enlarged view

Fig. Generic data link connector location-1996-00 vehicles

 

 
label.common.footer.alt.autozoneLogo