Quest 1995-1996

Mass Air Flow Sensor (Hot Wire)

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the MAF sensor electrical connector.
  4.  
  5. Remove the air cleaner-to-intake manifold hose from the MAF sensor.
  6.  
  7. Release the four spring clips from the air cleaner lid and remove the lid and MAF sensor assembly from the vehicle.
  8.  
  9. Remove the four MAF sensor nuts and remove the sensor from the air cleaner lid.
  10.  
  11. The installation is the reverse of removal. Tighten the MAF sensor nuts to 71-88 inch lbs. (8-10 Nm).

    Click image to see an enlarged view

    Fig. Disconnecting the MAF sensor electrical connector



    Click image to see an enlarged view

    Fig. Removing the MAF sensor nuts

  12.  

 
label.common.footer.alt.autozoneLogo