Quest 1995-1996

Removal & Installation

Print

Specific to:

Mercury Villager 1993-1995

Nissan Quest 1993-1995

  1. Disconnect the negative battery cable.
  2.  
  3. Pull out the ashtray.
  4.  
  5. Remove the screw from the center instrument panel bezel. Pull the bezel evenly away from the instrument panel to release the clips, being careful not to damage the bezel, and remove it.
  6.  
  7. Remove the four climate control assembly screws. It may be necessary to loosen the radio bracket screws to allow enough clearance to remove the climate control assembly.
  8.  
  9. Slide the control assembly out, disconnect the five electrical connectors, and remove the control assembly.
  10.  
  11. The installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Remove the screw from the center instrument panel bezel and . . .



    Click image to see an enlarged view

    Fig. . . . pull the bezel evenly away from the instrument panel and remove it



    Click image to see an enlarged view

    Fig. After the bezel is removed, remove the four screws to remove the climate control assembly

  12.  

Specific to:

Mercury Villager 1996-1998

Nissan Quest 1996-1998

  1. Disconnect the negative battery cable.
  2.  
  3. Pull out the ashtray.
  4.  
  5. Remove the four lower center console cover screws or clips and remove the cover.
  6.  
  7. Remove the two upper and two lower screws from the center instrument panel bezel. Pull the bezel evenly away from the instrument panel to release the clips, being careful not to damage the bezel. Disconnect the lighter and lighter lamp electrical connectors and remove the bezel.
  8.  
  9. Remove the four climate control assembly screws. Slide the control assembly out, disconnect the three electrical connectors, and remove the control assembly.
  10.  
  11. The installation is the reverse of removal.
  12.  

 
label.common.footer.alt.autozoneLogo