Quest 1995-1996

Resistor

Print

Specific to:

Mercury Villager 1993-2000

Nissan Quest 1993-2000

The resistor is located in the two-wire ignition coil wiring harness near the coil connector on 1993-98 3.0L engines, and near the distributor connector on 3.3L engines. It has a two-wire connector and is taped to the harness. To test the resistor:

  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the resistor connector.
  4.  
  5. Connect ohmmeter leads to the resistor terminals. The resistance should be approximately 2200 (2.2k) ohms. If not, replace the resistor.
  6.  

 
label.common.footer.alt.autozoneLogo