Quest 1995-1996

Amplifier

Print

Removal & Installation



Main Amplifier

Specific to:

Mercury Villager 1993-1995

Nissan Quest 1993-1995

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the driver-s side interior rear quarter panel. Please refer to Body and Trim, Interior, Rear Quarter Panels, Removal and Installation for the procedure.
  4.  
  5. Disconnect the main amplifier electrical connectors.
  6.  
  7. Remove the four main amplifier screws and remove the amplifier.
  8.  
  9. The installation is the reverse of removal.
  10.  

Specific to:

Mercury Villager 1996-1998

Nissan Quest 1996-1998

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the driver-s side interior rear quarter panel. Please refer to Body and Trim, Interior, Rear Quarter Panels, Removal and Installation for the procedure.
  4.  
  5. Remove the three screws from the speaker bracket. Disconnect the speaker electrical connector and remove the speaker and bracket assembly.
  6.  
  7. Disconnect the main amplifier electrical connectors.
  8.  
  9. Remove the four main amplifier screws and remove the amplifier.
  10.  
  11. The installation is the reverse of removal.
  12.  

Sub-Woofer Amplifier

Specific to:

Mercury Villager 1993-1995

Nissan Quest 1993-1995

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the passenger-s side interior rear quarter panel. Please refer to Body and Trim, Interior, Rear Quarter Panels, Removal and Installation for the procedure.
  4.  
  5. Remove the five subwoofer housing screws and remove the housing.
  6.  
  7. Remove the three subwoofer amplifier screws.
  8.  
  9. Disconnect the subwoofer amplifier electrical connectors and remove the amplifier.
  10.  
  11. The installation is the reverse of removal.
  12.  

Specific to:

Mercury Villager 1996-1998

Nissan Quest 1996-1998

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the passenger-s side interior rear quarter panel. Please refer to Body and Trim, Interior, Rear Quarter Panels, Removal and Installation for the procedure.
  4.  
  5. Remove the three screws from the speaker bracket. Disconnect the speaker electrical connector and remove the speaker and bracket assembly.
  6.  
  7. Remove the three subwoofer housing screws and remove the housing.
  8.  
  9. Disconnect the subwoofer amplifier electrical connectors and remove the amplifier.
  10.  
  11. The installation is the reverse of removal.
  12.  

 
label.common.footer.alt.autozoneLogo