Quest 1995-1996

Radio, Radio/Tape Player, Radio/CD Player

Print

Removal & Installation



Specific to:

Mercury Villager 1993-1995

Nissan Quest 1993-1995

  1. Disconnect the negative battery cable.
  2.  
  3. Pull out the ashtray.
  4.  
  5. Remove the screw from the center instrument panel bezel. Pull the bezel evenly away from the instrument panel to release the clips, being careful not to damage the bezel.
  6.  
  7. Remove the four audio unit bracket screws. Slide the climate control/audio unit assembly out, disconnect the electrical and antenna connections, and remove the assembly.
  8.  
  9. Remove the four audio unit-to-bracket screws and remove the unit.
  10.  
  11. The installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Remove the four audio unit bracket screws



    Click image to see an enlarged view

    Fig. Slide the climate control/audio unit assembly out and disconnect the electrical and antenna connections



    Click image to see an enlarged view

    Fig. Remove the two screws from each side of the audio unit

  12.  

Specific to:

Mercury Villager 1996-1998

Nissan Quest 1996-1998

  1. Disconnect the negative battery cable.
  2.  
  3. Pull out the ashtray.
  4.  
  5. Remove the four lower center console cover screws or clips and remove the cover.
  6.  
  7. Remove the two upper and two lower screws from the center instrument panel bezel. Pull the bezel evenly away from the instrument panel to release the clips, being careful not to damage the bezel. Disconnect the lighter and lighter lamp electrical connectors and remove the bezel.
  8.  
  9. Remove the four audio unit bracket screws. Slide the audio unit out, disconnect the electrical and antenna connections, and remove the audio unit and bracket assembly.
  10.  
  11. Remove the four audio unit-to-bracket screws and remove the bracket from the unit.
  12.  
  13. The installation is the reverse of removal.
  14.  

 
label.common.footer.alt.autozoneLogo