Quest 1995-1996

Fenders

Print

Removal & Installation



  1. Remove the cowl vent top vent panel.
  2.  
  3. Remove the 4 upper front fender bolts.
  4.  
  5. Remove the 2 front fender door jamb bolts.
  6.  
  7. Remove the parking light. Remove the screw beneath the parking light.
  8.  
  9. Remove the 2 headlight housing screws.
  10.  
  11. Remove the 2 front fender-to-body bolts.
  12.  
  13. If equipped with a fixed antenna, remove the radio antenna mast.
  14.  
  15. Remove the antenna bezel nut and antenna bezel.
  16.  
  17. Remove the lower front fender bolt.
  18.  
  19. Remove the front fender splash shield.
  20.  
  21. Remove the 2 front fender brace screws and nuts.
  22.  
  23. Installation is the reverse of the removal procedure. Make sure the fender is aligned and the distances around the fender are equal.
  24.  

 
label.common.footer.alt.autozoneLogo