Quest 1995-1996

Fluid Level Check

Print

Specific to:

Mercury Villager 1993-2000

Nissan Quest 1993-2000


CAUTION
Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with the eyes and wash your hands thoroughly after handling brake fluid. If you do get brake fluid in your eyes, flush your eyes with clean, running water for 15 minutes. If eye irritation persists, or if you have taken brake fluid internally, IMMEDIATELY seek medical assistance.

Observe the fluid level indicators on the master cylinder; the fluid level should be between the MIN and MAX lines.

Before removing the master cylinder reservoir cap, make sure the vehicle is resting on level ground and clean all dirt away from the top of the master cylinder. Unscrew the cap and fill the master cylinder until the level is between the MIN and MAX lines with the appropriate brake fluid.

If the level of the brake fluid is less than half the volume of the reservoir, it is advised that you check the brake system for leaks. Leaks in a hydraulic brake system most commonly occur at the wheel cylinder and brake line junction points.

Click image to see an enlarged view

Fig. Wipe the master cylinder reservoir clean before opening the cap to ensure that no contaminants enter the brake fluid



Click image to see an enlarged view

Fig. The brake fluid level should be between the MIN and MAX lines

 
label.common.footer.alt.autozoneLogo