Quest 1995-1996

Headlight Switch

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Carefully pull the headlamp switch assembly from the instrument panel. There are four metal retaining clips which snap into the instrument panel to hold the assembly in place.
  4.  
  5. Disconnect the headlamp switch electrical connectors and remove the switch and bezel assembly.
  6.  
  7. Remove the headlamp switch-to-bezel screws and remove the bezel from the switch.
  8.  
  9. The installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Carefully pull the headlamp switch assembly from the instrument panel and . . .



    Click image to see an enlarged view

    Fig. . . . disconnect the electrical connectors



    Click image to see an enlarged view

    Fig. Remove the screws to replace the headlight switch

  10.  

 
label.common.footer.alt.autozoneLogo