Quest 1995-1996

Relieving Fuel System Pressure

Print

  1. Remove the fuel pump relay. On 1993-95 vehicles, the relay is located in the driver-s side engine compartment relay panel. On 1996-00 vehicles, the relay is located in the main fuse and relay panel in the engine compartment.
  2.  
  3. Start the engine.
  4.  
  5. After the engine stalls, crank the engine two more times to ensure that all of the pressure is relieved.
  6.  
  7. Turn the ignition switch OFF , and install the fuel pump relay.
  8.  
  9. After the fuel system repairs are completed, cycle the ignition switch several times from the OFF to ON positions without starting the engine, allowing five seconds at each position, to build fuel pressure within the system.

    Click image to see an enlarged view

    Fig. Removing the fuel pump relay-1993-95 vehicles



    Click image to see an enlarged view

    Fig. Fuel pump relay location-1996-98 vehicles



    Click image to see an enlarged view

    Fig. Fuel pump relay location-1999-00 vehicles

  10.  

 
label.common.footer.alt.autozoneLogo