Quest 1995-1996

Windshield Wiper Systems

Print

Blade & Arm



Removal & Installation
  1. Place the wiper blade and arm assembly in an upright position, away from the windshield.
  2.  
  3. Slide the lock tab at the pivot away from the bottom of the arm.
  4.  
  5. Pull up on the wiper blade and arm assembly to remove it.
  6.  
  7. The installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Removing the front wiper blade and arm assembly

  8.  

Removal & Installation



Wiper Motor
  1. Disconnect the negative battery cable.
  2.  
  3. Remove both wiper arm and blade assemblies.
  4.  
  5. On 1993-98 vehicles, remove both the driver-s and passenger-s side windshield side moldings. Pull back the door weatherstrip on each side to access the windshield side molding screws. Remove the five screws from each side and remove the moldings.
  6.  
  7. Raise or lower the hood as necessary to access the cowl top vent panel screws and/or pin clips and remove them. Turn the plastic screws 90° to unlock them.
  8.  
  9. Lift the cowl top vent panel away from the body. Disconnect the washer hose from the Y-connector and remove the panel.
  10.  
  11. Disconnect the front wiper motor electrical connector.
  12.  
  13. Remove the six front wiper motor and bracket assembly bolts and remove the assembly.
  14.  
  15. Remove the wiper linkage nut and disconnect the linkage from the wiper motor.
  16.  
  17. Remove the four bracket-to-wiper motor bolts and remove the bracket from the motor.
  18.  
  19. The installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Pull back the door weatherstrip to remove the windshield side molding screws



    Click image to see an enlarged view

    Fig. Disconnect the washer hose and remove the cowl top vent panel



    Click image to see an enlarged view

    Fig. Disconnect the front wiper motor electrical connector



    Click image to see an enlarged view

    Fig. Remove the front wiper motor and bracket assembly bolts



    Click image to see an enlarged view

    Fig. Remove the four bracket-to-wiper motor bolts and remove the bracket

  20.  

 
label.common.footer.alt.autozoneLogo