RX300 1999

Removal & Installation

Print

  1. Drain the engine coolant into a suitable container.
  2.  
  3. Disconnect the inlet and outlet radiator hoses.
  4.  
  5. Disconnect the oil cooler inlet and outlet hoses.
  6.  
  7. Remove the 2 upper supports, then remove the radiator assembly
  8.  
  9. Remove the lower radiator support.
  10.  
  11. Remove the 6 bolts, then remove the fan with the motor as an assembly.
  12.  
  13. Installation is the reverse of the removal procedure. Torque the 6 bolts to 44 inch lbs. (5 Nm).
  14.  
  15. Fill the engine with the proper type and amount of engine coolant.
  16.  
  17. Start the engine and check for coolant leaks. Recheck the coolant level and add, as necessary.
  18.  

 
label.common.footer.alt.autozoneLogo