RX300 1999

Lower Control Arms

Print

Removal & Installation





Click image to see an enlarged view

Fig. Lower control arm mounting

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Raise and safely support the car.
  4.  
  5. Remove the wheel.
  6.  
  7. Remove the 2 nuts and 1 bolt and disconnect the ball joint from the lower arm
  8.  
  9. Remove the 2 bolts on the fron side of the arm.
  10.  
  11. Remove the bolt and nut on the rear side of the arm.
  12.  
  13. Remove the arm.
  14.  
  15. Remove the bushing stopper from the arm.
  16.  
  17. Installation is the reverse of removal. Torque the front and rear bolts/nuts to 152 ft. lbs. (206 Nm). Torque the ball joint to arm bolt/nuts to 94 ft. lbs. (127 Nm).
  18.  

 
label.common.footer.alt.autozoneLogo