//bottom ads

RX300 1999

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation





Click image to see an enlarged view

Fig. Front sway bar

  1. Raise and safely support the vehicle.
  2.  
  3. Remove the wheels.
  4.  
  5. Remove the stabilizer links (2 nuts each).
  6.  
  7. Remove the stabilzer bar brackets/bushings.
  8.  
  9. Remove the bar.
  10.  
  11. Installation is the reverse of removal. Install the bushings to the outside of the stopper. Torque the brackets to 14 ft. lbs. (19 Nm); the link nuts to 29 ft. lbs. (39 Nm). If installing the original bar, place the color coded end on the left.
  12.  

 
label.common.footer.alt.autozoneLogo