RX300 1999

Fuel Pressure Regulator

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove the fuel pump, as outlined earlier in this section.
  6.  
  7. Remove the No.2 fuel suction support.
  8.  
  9. Pull out the pressure regulator.
  10.  

To install:

  1. Apply a light coat of gasoline or spindle oil to the O-ring, and install the fuel pressure regulator.
  2.  
  3. Assemble and install the fuel pump.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo