RX300 1999

Brake Calipers

Print

Removal & Installation





Click image to see an enlarged view

Fig. Rear disc brake components

  1. Disconnect the brake line from the caliper.
  2.  
  3. Remove the caliper mounting bolt.
  4.  
  5. Remove the caliper, pads, shims and support plates.
  6.  
  7. Remove the main pin.
  8.  
  9. Installation is the reverse of removal. Torque the main pin to 20 ft. lbs. (26 Nm), the caliper bolt to 14 ft. lbs. (20 Nm), and the union bolt to 21 ft. lbs. (29 Nm).
  10.  

 
label.common.footer.alt.autozoneLogo