RX300 1999

Brake Disc (Rotor)

Print

Removal & Installation





Click image to see an enlarged view

Fig. Rear disc brake components

  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear wheel and tire assembly.
  4.  
  5. Unbolt and remove the caliper, but do NOT disconnect the fluid line. Suspend the caliper from the suspension with a piece of wire.
  6.  
  7. Remove the rotor.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

 
label.common.footer.alt.autozoneLogo