Ram 1500, 2500, 3500, 2WD and 4WD, 2001-2005

3.7L V6 VIN K Std 10

Print

Trouble Code: P2323



Ignition Coil No. 8 Secondary Circuit Insufficient Ionization

Possible Causes:



Cylinder No. 8 spark plug or wire is damaged or it has failed
 
Ignition Coil No. 8 is damaged or it has failed
 
Ignition coil control circuit is open or shorted to ground
 
PCM has failed
 

Trouble Code: P2503



Charging System Voltage Low

Possible Causes:



Battery sense circuit has a high resistance condition
 
Generator ground circuit has a high resistance condition
 
Generator field ground circuit is open
 
Generator field control circuit is open or shorted to ground
 
Generator is damaged or it has failed
 

Trouble Code: P2700



A/T L/R Inadequate Element Volume Detected

Possible Causes:



L/R volume clutch index is too low
 
TCM L/R volume clutch circuit is damaged or has failed
 

Trouble Code: P2701



A/T 2C Inadequate Element Volume Detected

Possible Causes:



2C volume clutch index is too low
 
TCM 2C volume clutch circuit is damaged or has failed
 

Trouble Code: P2702



A/T O/D Inadequate Element Volume Detected

Possible Causes:



O/D volume clutch index is too low
 
TCM O/D volume clutch circuit is damaged or has failed
 

Trouble Code: P2703



A/T U/D Inadequate Element Volume Detected

Possible Causes:



U/D volume clutch index is too low
 
TCM U/D volume clutch circuit is damaged or has failed
 

Trouble Code: P2704



A/T 4C Inadequate Element Volume Detected

Possible Causes:



4C volume clutch index is too low
 
TCM 4C volume clutch circuit is damaged or has failed
 

Trouble Code: P2706



A/T MS Solenoid Circuit Malfunction

Possible Causes:



Check for a loose connector to the MS solenoid (intermittent)
 
MS solenoid control circuit is open or shorted to ground
 
MS solenoid control circuit is shorted to system power (B+)
 
MS solenoid is damaged or it has failed
 
Transmission control relay output supply circuit is open
 
TCM MS solenoid circuit is damaged or it has failed
 

Trouble Code: U0101



No TCM Bus Message

Possible Causes:



PCI Bus unable to communicate with (DRBIII) scan tool
 
Fused ignition switch output incorrect (off-run-start)
 
Intermittent condition
 
PCM has failed
 

Trouble Code: U0155



No Cluster Bus Message

Possible Causes:



Communication link with instrument cluster has failed
 
Instrument cluster operation improper or has failed
 
PCM has failed
 

Trouble Code: U0168



No SKIM Bus Message

Possible Causes:



Intermittent operation
 
PCI Bus circuit open or shorted from PCM to SKIM
 
Loss of communication between PCM and SKIM
 
SKIM or PCM has failed
 

 
label.common.footer.alt.autozoneLogo