Ram 1500, 2500, 3500, 2WD and 4WD, 2001-2005

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel tank
     

  6.  
  7. Pull the filter/regulator out of the rubber grommet. Cut the hose clamp and remove the fuel line.

    Click image to see an enlarged view

    Fig. Pull and twist the filter/regulator to remove it from the top of the fuel pump module

    Pull and twist the filter/regulator to remove it from the top of the fuel pump module
  8.  

To install:

  1. Install the filter/regulator with a new clamp and push it into the rubber grommet.
  2.  
  3. Install or connect the following:

    Fuel tank
     
    Negative battery cable
     

  4.  
  5. Start the engine and check for leaks.
  6.  

Gasoline Engines



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel tank
     

  6.  
  7. Pull the filter/regulator out of the rubber grommet. Cut the hose clamp and remove the fuel line.

    Click image to see an enlarged view

    Fig. Pull and twist the filter/regulator to remove it from the top of the fuel pump module

    Pull and twist the filter/regulator to remove it from the top of the fuel pump module
  8.  

To install:

  1. Install the filter/regulator with a new clamp and push it into the rubber grommet.
  2.  
  3. Install or connect the following:

    Fuel tank
     
    Negative battery cable
     

  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo