Ram B1500, B2500, B3500, 1999-2003

Slave (Actuator) Cylinder

Print

Removal & Installation




NOTE
The release bearing and slave cylinder are serviced together as an assembly. Do not attempt to separate the bearing from the slave cylinder.

  1. With vehicle in neutral, position vehicle on hoist.
  2.  
  3. Disconnect hydraulic line from hydraulic slave cylinder with Line Disconnect Tool 6638/6638A.
  4.  
  5. Remove transmission.
  6.  
  7. Remove slave cylinder bolts and remove cylinder.
  8.  

To install:

  1. Install slave cylinder onto transmission and tighten bolts to 16 ft. lbs. (22 Nm).
  2.  
  3. Install transmission assembly.
  4.  
  5. Connect hydraulic line to slave cylinder.
  6.  
  7. Bleed the system.
  8.  

 
label.common.footer.alt.autozoneLogo