Ram B1500, B2500, B3500, 1999-2003

5.9L V8 VIN Z Std 2

Print

Trouble Code: P0147



O2 (B1 S3) Heater Fault

Possible Causes:



ASD relay output (power) circuit to the heater is open
 
O2 heater ground circuit open or O2 signal circuit is open
 
O2 heater element has high resistance
 
O2 heater element has failed (open or shorted)
 
PCM has failed
 

Trouble Code: P0151



O2 (B2 S1) Circuit Short to Ground

Possible Causes:



O2 signal circuit is shorted to chassis or Sensor ground
 
O2 signal circuit is open (circuit reads 450 mV when open)
 
O2 ground circuit is open (circuit reads 170 mV when open)
 
O2 may be contaminated or it has failed
 
PCM has failed
 

Trouble Code: P0152



O2 (B2 S1) Short to Voltage

Possible Causes:



O2 signal tracking in connector due to wet/oily conditions
 
O2 ground circuit is open
 
O2 heater supply circuit is open
 
O2 signal circuit is open
 
O2 element is damaged or it has failed
 
PCM has failed
 

Trouble Code: P0153



O2 (B2 S1) Slow Response

Possible Causes:



Exhaust leak present in the exhaust manifold or exhaust pipes
 
O2 signal or ground circuit has a high resistance condition
 
O2 element is fuel contaminated
 
O2 element is deteriorated or it has failed
 

Trouble Code: P0154



O2 (B2 S1) Remains At Center

Possible Causes:



Exhaust leak present in the exhaust manifold or exhaust pipes
 
O2 signal or ground circuit has a high resistance condition
 
O2 element is fuel contaminated
 
O2 element is deteriorated or it has failed
 

Trouble Code: P0155



O2 (B2 S1) Heater Circuit

Possible Causes:



ASD relay output (power) circuit to the heater is open
 
O2 heater ground circuit open or O2 signal circuit is open
 
O2 heater element has high resistance
 
O2 heater element has failed (open or shorted)
 
PCM has failed
 

Trouble Code: P0157



O2 (B2 S2) Circuit Shorted to Ground

Possible Causes:



O2 signal circuit is shorted to chassis or Sensor ground
 
O2 may be contaminated or it has failed
 
PCM return or signal circuit is damaged or has failed
 

Trouble Code: P0158



O2 (B2 S2) Circuit Shorted to Ground

Possible Causes:



O2 signal tracking due to wet/oily condition in the connector
 
O2 signal circuit is open or shorted to system power
 
O2 is damaged or is has failed
 
PCM has failed
 

Trouble Code: P0159



O2 (B2 S2) Slow Response

Possible Causes:



Exhaust leak present in the exhaust manifold or exhaust pipes
 
O2 element is fuel contaminated
 
O2 element is deteriorated or it has failed
 

Trouble Code: P0161



O2 (B2 S2) Slow Response

Possible Causes:



ASD relay output (power) circuit to the heater is open
 
O2 heater ground circuit is open or O2 signal circuit open
 
O2 heater element has high resistance, is open or shorted
 
PCM has failed
 

Trouble Code: P0165



Starter Relay Circuit

Possible Causes:



Starter Relay control circuit is open
 
Starter Relay Control circuit is grounded
 
PCM has failed
 

Trouble Code: P0171



Fuel System Lean (Bank 1)

Possible Causes:



Air leaks in intake manifold, exhaust pipes or exhaust manifold
 
Base engine mechanical problem causing a lean A/F condition
 
Fuel control Sensor is out of calibration (e.g., ECT, IAT or MAP)
 
Fuel delivery component fault (clogged filter, low fuel pressure)
 
O2 element is contaminated, deteriorated or it has failed
 
Vacuum hose is disconnected, broken, leaking or loose
 

Trouble Code: P0172



Fuel System Rich (Bank 1)

Possible Causes:



Base engine fault (i.e., cam timing incorrect, oil level too high)
 
EVAP vapor recovery system failure (e.g., canister full of fuel)
 
Fuel control Sensor is out of calibration (e.g., ECT, IAT or MAP)
 
Fuel delivery component fault (injector leak, high fuel pressure)
 
O2 element is contaminated, deteriorated or it has failed
 
O2 heater is damaged or it has failed
 

Trouble Code: P0174



Fuel System Lean (Bank 2)

Possible Causes:



Air leaks in intake manifold, exhaust pipes or exhaust manifold
 
Base engine mechanical problem causing a lean A/F condition
 
Fuel control Sensor is out of calibration (e.g., ECT, IAT or MAP)
 
Fuel delivery component fault (clogged filter, low fuel pressure)
 
O2 element is contaminated, deteriorated or it has failed
 
Vacuum hose is disconnected, broken, leaking or loose
 

Trouble Code: P0175



Fuel System Rich (Bank 2)

Possible Causes:



Base engine fault (i.e., cam timing incorrect, oil level too high)
 
EVAP vapor recovery system has failed (canister full of fuel)
 
Fuel injector (one or more) leaking or pressure regulator leaking
 
O2 element is deteriorated or has failed
 

Trouble Code: P0201



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0202



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0203



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0204



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0205



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0206



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0207



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0208



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0209



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0210



Injector 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10 Control

Possible Causes:



Fuel injector 1-10 control circuit is open or grounded
 
Fuel injector 1-10 power circuit from the ASD relay is open
 
Fuel injector 1-10 has failed
 
PCM injector 1-10 driver has failed
 

Trouble Code: P0218



A/T High Temperature Operation Activated

Possible Causes:



Engine cooling system malfunction present
 
High temperature operations activated
 
Transmission oil pump flow is too low or it is restricted
 

Trouble Code: P0300



Multiple Cylinder Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects two or more cylinders
 
Erratic or interrupted CKP or CMP Sensor signals
 
Fuel delivery component fault that affects two or more cylinders (i.e., a contaminated, dirty or sticking fuel injector)
 
Ignition system problem (coil or plug) in two or more cylinders
 
Vehicle driven with low fuel pressure or while very low on fuel
 

Trouble Code: P0301



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0302



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0303



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0304



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0305



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0306



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0307



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0308



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0309



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0310



Cylinder 1-10 Misfire Detected

Possible Causes:



Air leak in the intake manifold, or in the EGR or EVAP system
 
Base engine mechanical fault that affects only one cylinder
 
Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector)
 
Ignition system problem (coil or plug) in only one cylinder
 

Trouble Code: P0315



No Crankshaft Position Sensor Learned

Possible Causes:



Crankshaft tone wheel flex plate is damaged
 
Tone wheel/pulse ring may be damaged
 
Erratic CKP Sensor signals (wiring/connector problem)
 
CKP Sensor has failed
 
PCM has failed
 

Trouble Code: P0320



No Crank Reference Signal to PCM

Possible Causes:



CKP Sensor signal circuit is open or grounded
 
CKP Sensor VREF circuit is open or grounded
 
Tone wheel or flex plate damage or erratic CKP Sensor signals
 
CKP Sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0325



Knock Sensor No. 1 Circuit

Possible Causes:



Knock Sensor connector is damaged or shorted
 
Knock Sensor signal circuit open or grounded
 
Knock Sensor signal circuit shorted to return circuit
 
Knock Sensor return circuit is open
 
Knock Sensor not tightened properly
 
Knock Sensor damaged or has failed (it may be open internally)
 
PCM has failed
 

 
label.common.footer.alt.autozoneLogo