Ram B1500, B2500, B3500, 1999-2003

Brake Disc (Rotor)

Print

Inspection



  1. Rotor surface should be smooth and featureless. Scoring, ripples, scratches, etc., should be removed. The final finish should be a non-directional crosshatch pattern.
  2.  
  3. Minimum acceptable thickness is stamped on the rotor hub. Measurement should be taken after refinishing.
  4.  
  5. Check run-out and compare with the specification given.
  6.  



Click image to see an enlarged view

Fig. Correct rotor finish after turning down

 
label.common.footer.alt.autozoneLogo