Ram B1500, B2500, B3500, 1999-2003

Removal & Installation

Print

Ignition Coil Capacitor



The coil capacitor is located in the right-rear section of the engine compartment. It is attached with a mounting stud and nut.

  1. Disconnect the electrical connector from the capacitor.
  2.  
  3. Remove the mounting nut and ground strap.
  4.  
  5. Remove the capacitor.

    Click image to see an enlarged view

    Fig. Location of the ignition coil capacitor (1), mounting stud (2), ground strap (3), mounting nut (4) and electrical connector (5)

  6.  

To install:

  1. Position to capacitor to mounting stud.
  2.  
  3. Position ground strap to mounting stud.
  4.  
  5. Tighten the nut to 60 inch lbs. (7 Nm).
  6.  
  7. Attach the electrical connector to coil capacitor.
  8.  

 
label.common.footer.alt.autozoneLogo