Ram B1500, B2500, B3500, 1999-2003

Moldings & Panels

Print

Removal & Installation



Door Panel
Cargo
  1. Open the cargo door.
  2.  
  3. Remove the screws securing the pull cup to the door.
  4.  
  5. Remove the screw attaching the inside release handle to the door.
  6.  
  7. The trim panel is secured with spring clips and push-in fasteners. Using a trim panel removal tool, remove the push-in fasteners.
  8.  
  9. Pull the trim panel outward to disengage the spring clips.
  10.  
  11. Remove the trim panel.
  12.  
  13. Disengage the cargo door release cable from the inside release handle.
  14.  
  15. Installation is the reverse of removal.
  16.  



Click image to see an enlarged view

Fig. Ram cargo door trim panel fasteners

Front Door
  1. Open the door.
  2.  
  3. Roll down the window.
  4.  
  5. Remove the window crank, if fitted.
  6.  
  7. Pry out the power window/lock switch panel from the trim panel, if so equipped. Disconnect the wires from the switch panel.
  8.  
  9. Remove the screw attaching the trim panel to the outside mirror frame.
  10.  
  11. Remove the screws attaching the pull cup to the door.
  12.  
  13. With a trim panel removal tool, disengage the clips around the perimeter of the trim panel attaching the panel to the door.
  14.  
  15. While holding the bottom of the trim panel away from the door, lift upward and inboard.
  16.  
  17. Disengage the power mirror switch connector, if fitted.
  18.  
  19. Remove the trim panel from the door.
  20.  
  21. Installation is the reverse of removal.
  22.  



Click image to see an enlarged view

Fig. Removing the window crank with the special tool



Click image to see an enlarged view

Fig. Remove the screw attaching the trim panel to the outside mirror frame



Click image to see an enlarged view

Fig. Removing the pull cup screws



Click image to see an enlarged view

Fig. Pry out the power window/lock switch panel



Click image to see an enlarged view

Fig. Disconnect the wiring from the switch panel



Click image to see an enlarged view

Fig. Prying off the trim panel with a removal tool



Click image to see an enlarged view

Fig. Removing the trim panel. Arrow indicates the water dam

 
label.common.footer.alt.autozoneLogo