Ram Truck 1500, 2500 & 3500 (2006-2008)

Axle Actuator

Print

Removal & Installation



C205FD
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove actuator wiring connector.
  4.  
  5. Remove actuator bolts.
  6.  
  7. Remove actuator from disconnect pocket.
  8.  

To install:

  1. Clean actuator sealing surface and install new gasket if necessary.
  2.  
  3. Align actuator shift fork with disconnect collar and install actuator on disconnect pocket.

    Click image to see an enlarged view

    Fig. Align actuator shift fork (1) with disconnect collar (2)

  4.  
  5. Install actuator bolts and tighten to 20 ft. lbs. (27 Nm).
  6.  
  7. Install disconnect actuator wiring connector.
  8.  
  9. Verify differential fluid level and add fluid if necessary.
  10.  

 
label.common.footer.alt.autozoneLogo