Ram Truck 1500, 2500 & 3500 (2006-2008)

Ignition Lock Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE
    The ignition key must be in the key cylinder for cylinder removal.

  2.  
  3. Disconnect negative cable(s) from battery.
  4.  
  5. Remove upper and lower covers (shrouds) from steering column.
  6.  
  7. Place shifter in PARK position.
  8.  
  9. A retaining pin is located at the underside of the key cylinder assembly.
  10.  
  11. Rotate key to RUN position.
  12.  
  13. Press in on retaining pin while pulling key cylinder from ignition switch .

    Click image to see an enlarged view

    Fig. Ignition lock cylinder removal

  14.  

 
label.common.footer.alt.autozoneLogo