Removal & Installation
- Before servicing the vehicle, refer to the Precautions section.
Remove or disconnect the following:
Negative battery cable
- Turn the crankshaft clockwise to position the No. 1 piston.
- Remove the plug bolt.
Install the Engine Timing Peg 303-507.
NOTEClean the gasket surface with metal surface cleaner.
Install a new gasket and the oil pump assembly. Tighten the bolts in the sequence shown in two stages.
Step 1: Tighten the bolts to 80 inch lbs. (10 Nm)
- Install a n