Honda CRV/Odyssey 1995-2000 Repair Information

Sway Bar

Print

REMOVAL & INSTALLATION



  1. Matchmark the sway bar for proper reinstallation.
  2.  
  3. Disconnect the sway bar links from the end of the sway bar.
  4.  
  5. Remove the sway bar bushing brackets from the vehicle's under body.
  6.  
  7. Remove the sway bar.
  8.  

To install:
  1. Installation is the reverse of removal noting the following steps:

    Apply silicone grease between the sway bar bracket bushing and sway bar.
     
    Tighten the sway bar bracket-to-body bolts: 16 ft. lbs. (22 Nm)
     
    On CRV models, tighten the link nut and bolt 22 ft. lbs. (29 Nm)
     
    On 4-cylinder Odyssey models, tighten the link nut and bolt 14 ft. lbs. (19 Nm)
     
    On V6 Odyssey models, tighten the link nut 58 ft. lbs. (78 Nm)
     

  2.  

 
label.common.footer.alt.autozoneLogo