Fig. Fig. 1 Alliance and Encore fuse panel location-note the fuse cover retaining clips (A)
Fig. Fig. 2 Alliance and Encore circuit breakers and relays attached to the fuse cover
Fig. Fig. 3 Typical blade type fuse panel from an Alliance or Encore model
Fig. Fig. 4 R-18 and Fuego fuse cover location-remove the two screws (4), then release the two tabs (5). Some early R-18 models also had screws at location (5)
Fig. Fig. 5 Typical ceramic type fuse panel from a Fuego model
On all models, except the Alliance, the fuse panel is located on the left side, under the dash, next to the steering column. On the Alliance, the fuse panel is located under the glove compartment. To remove the fuse panel, on all except Alliance, remove the attaching screws and/or clips. To remove the Alliance fuse panel, first depress the clips and swing the fuse panel cover out of the way, then unscrew the fuse panel.