Renault Coupes/Sedans/Wagons 1975-1985 Repair Guide

Fuel Injector

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Fig. 16 Exploded view of the throttle body injector and related components

  1. Remove the air cleaner.
  2.  
  3. Disconnect the battery.
  4.  
  5. Remove the wire at the injector.
  6.  
  7. Remove the injector retaining ring screws.
  8.  
  9. Remove the injector retaining ring.
  10.  
  11. Using a small pliers, carefully grasp the center collar of the injector (Between the two terminals) and pull it out with a twisting motion.
  12.  
  13. Discard the upper and lower rubber O-rings. Note that the back-up ring at the bottom, fits over the O-ring.
  14.  
  15. Coat the new O-rings with light oil and install them. Install the back-up ring over the lower O-ring.
  16.  
  17. Insert the injector in the throttle body with a pushing twisting motion, making certain that it seats fully. Make sure that the wire terminals are parallel with the retaining ring screws.
  18.  
  19. Install the retaining ring and screws.
  20.  

 
label.common.footer.alt.autozoneLogo