Renault Coupes/Sedans/Wagons 1975-1985 Repair Guide

Throttle Body

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Throttle body removal-injector harness (1), WOT harness connector (2), ISC connector (3), TBI retaining nuts (4), fuel return pipe (5), fuel supply pipe (6)

  1. Remove the throttle cable and return spring.
  2.  
  3. Disconnect the injector wiring.
  4.  
  5. Disconnect the wide open throttle switch wire.
  6.  
  7. Disconnect the Idle Speed Control motor wiring.
  8.  
  9. Disconnect the fuel pipe at the throttle body.
  10.  
  11. Disconnect the fuel return pipe at the throttle body.
  12.  
  13. Disconnect and tag the vacuum hoses at the throttle body.
  14.  
  15. Unbolt and remove the throttle body from the manifold.
  16.  
  17. Installation is the reverse of removal.
  18.  

 
label.common.footer.alt.autozoneLogo