Renault Coupes/Sedans/Wagons 1975-1985 Repair Guide

Seats

Print

REMOVAL & INSTALLATION



Front


Click image to see an enlarged view

Fig. Fig. 1 Mounting details for front seat bolts-(1) is the mounting bolt, (5) is the seat track, (6) is the spacer, (7) is the sealer and (8) is the vehicle floor

  1. Slide the seat to the forwardmost position.
  2.  
  3. Remove the rear mounting bolts.
  4.  
  5. Slide the seat to the rearmost position.
  6.  
  7. Remove the front mounting bolts.
  8.  
  9. Carefully remove the seat from the vehicle.
  10.  
  11. Installation is the reverse of the removal procedure. Lubricate the seat slides with lithium or chassis grease.
  12.  

Rear Stationary


Click image to see an enlarged view

Fig. Fig. 2 Remove the retaining clips (1), then lift the rear seat's legs from the slots in the floor (2)-Alliance and Encore models shown



Click image to see an enlarged view

Fig. Fig. 3 Rear seat belt mounting bolts (1)

  1. Remove the retaining clips on the front bottom of the seat.
  2.  
  3. Lift the seat cushion up and remove it from the vehicle.
  4.  
  5. Remove the seat belt attaching bolts.
  6.  
  7. Grasp the back cushion at the bottom and gently lift it to disengage the retaining tabs.
  8.  
  9. Remove the cushion from the vehicle.
  10.  
  11. Installation is the reverse of the removal procedure. If necessary, apply sealer to the seat belt attaching bolts to avoid water leaks.
  12.  

Rear Folding


Click image to see an enlarged view

Fig. Fig. 4 Folding the rear seat cushion forward



Click image to see an enlarged view

Fig. Fig. 5 View of the seat cushion hinge pins (1)-first remove the retaining clips



Click image to see an enlarged view

Fig. Fig. 6 Disconnect the parcel tray lift cords (1)



Click image to see an enlarged view

Fig. Fig. 7 Remove the seat belts from the retaining strap (2) and the seat back retaining bolts (3)

  1. Fold the seat cushion forward and remove the hinge pin clip and pin.
  2.  
  3. Remove the seat cushion from the vehicle.
  4.  
  5. If necessary, disconnect the parcel tray from the rear hatch and/or back cushion.
  6.  
  7. Fold the back cushion forward slightly. Remove the lower hinge bolts.
  8.  
  9. If necessary, remove the seat belts from a retaining strap on the back cushion.
  10.  
  11. Remove the back cushion from the vehicle.
  12.  
  13. Installation is the reverse of the removal procedure.
  14.  

 
label.common.footer.alt.autozoneLogo