Renault Coupes/Sedans/Wagons 1975-1985 Repair Guide

Combination Lighting-Directional Signal Switch

Print

REMOVAL & INSTALLATION



LeCar


Click image to see an enlarged view

Fig. Fig. 1 Unscrew the combination switch mounting bolts (arrows) to remove it-LeCar shown



Click image to see an enlarged view

Fig. Fig. 2 To gain access to the combination switch, remove the steering wheel and the lower column trim panel



Click image to see an enlarged view

Fig. Fig. 3 If necessary, remove the instrument cluster trim as well-combination switch (A), retaining screws (B)

  1. Disconnect the battery.
  2.  
  3. Remove the instrument panel housing screws.
  4.  
  5. Remove the switch bottom shell.
  6.  
  7. Remove the switch screws and disconnect the junction blocks.
  8.  
  9. Remove the switch.
  10.  

Installation is the reverse of removal.

All Except LeCar


Click image to see an enlarged view

Fig. Fig. 4 Combination switch mounting screw location (arrows) for the Alliance and Encore

  1. Disconnect the battery.
  2.  
  3. Remove the steering wheel and the two half housings.
  4.  
  5. Remove the retaining bolt and the retaining screw. Remove the junction block.
  6.  
  7. Remove the switch assembly by pulling it upward.
  8.  

Installation is the reverse of removal.

 
label.common.footer.alt.autozoneLogo