Rendezvous 2006-2007

Removal & Installation

Print

3.4L & 3.5L Engines



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Relieve fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Quick connect fittings at the inlet/outlet sides of the in-pipe fuel filter
     
    Fuel filter mounting bracket nut
     
    Fuel filter and drain any remaining fuel

    Click image to see an enlarged view

    Fig. The fuel filter is located on the frame rail near the tank-with 3.4L and 3.5L Engines

     

  6.  

To install:

  1. Install or connect the following:

    Fuel filter to the bracket
     
    Fuel filter assembly to the side rail near the fuel tank. Torque the nut to 89 inch lbs. (10 Nm).
     
    Inlet/outlet quick connectors to the fuel filter
     
    Negative battery cable
     

  2.  
  3. Start the vehicle and checks for leaks, repair if necessary.
  4.  

3.6L Engine



See the Fuel Pump procedure.

 
label.common.footer.alt.autozoneLogo