Rendezvous 2006-2007

Ignition Switch

Print

Removal & Installation



  1. Disable the Supplemental Inflatable Restraint (SIR) system, as outlined in the Chassis Electrical Section.
  2.  
  3. Remove the steering column trim covers.

    Click image to see an enlarged view

    Fig. Pull the theft deterrent control module (2) away from the lock cylinder housing (1).

  4.  
  5. Pull the theft deterrent control module away from the lock cylinder housing .

    Click image to see an enlarged view

    Fig. Depress the 2 white spring loaded retainers on the ignition switch.

  6.  
  7. Depress the 2 white spring loaded retainers on the ignition switch.
  8.  
  9. Slide the ignition switch downward away from the ignition lock cylinder case.
  10.  
  11. Disconnect the electrical connector from the ignition switch.
  12.  

To install:

  1. Connect the electrical connector to the ignition switch.
  2.  
  3. Slide the ignition switch into the ignition lock cylinder case.
  4.  
  5. Push the theft deterrent module, onto the lock cylinder housing.
  6.  
  7. Install the steering column trim covers.
  8.  
  9. Enable the SIR system, as outlined in the Chassis Electrical Section.
  10.  

 
label.common.footer.alt.autozoneLogo