Removal & Installation
- Before servicing the vehicle, refer to the Precautions Section.
Remove or disconnect the following:
Rear tire and wheel assembly
Install or connect the following:
NOTEInspect the sealing surface of the wheel drive shaft inner tri-pot housing to ensure it is free of corrosion. Use a crocus cloth in order to remove any light corrosion and clean the sealing surface with denatured alcohol, or equivalent.
Left axle shaft oil seal, using the J 44809
Lubricate the wheel drive shaft sealing surface of the oil seal with synthetic gear oil.
Left wheel halfshaft
- Inspect the differential lubricant level.