Repair Pontiac Mid-size 1974-1983 Repair Guide

Power Booster

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 View of the power brake booster mounting

  1. Disconnect the booster pushrod from the brake pedal arm by removing the retaining clip, and sliding the eyelet end of the pushrod off of the pin on the brake arm.
  2.  
  3. Disconnect the master cylinder from the booster.
  4.  
  5. Remove the attaching nuts and remove the booster from the firewall.
  6.  
  7. Installation is the reverse of removal. Tighten the booster-to-firewall attaching nuts to 22-33 ft. lbs.
  8.  

 
label.common.footer.alt.autozoneLogo