REMOVAL & INSTALLATION
Fig. Fig. 1 When removing the wiper arm, lift up on the locktab
Fig. Fig. 2 A special tool is available to separate the wiper arm from the drive spline
Fig. Fig. 3 When installing the arm, align the splines and drive tang
Please refer to
for information detailing wiper blade replacement.
The wiper arms are attached to the motor drive by a nut, the arm being splined to the drive. An inexpensive wiper arm tool is available to remove the arm from the drive spline (see illustration). You can also use a prytool to carefully separate the arm from the spline.