Ridgeline 2007-2008

Malfunction Indicator Light

Print

Resetting



  1. Connect an HDS or equivalent OBD II scan tool to the diagnostic connector.
  2.  
  3. Turn the ignition switch to ON .
  4.  
  5. Turn the tester or scan tool ON .
  6.  
  7. Check whether any DTCs have been stored. Note them down if necessary.
  8.  
  9. Clear DTCs.
  10.  
  11. The MIL should turn OFF .
  12.  

 
label.common.footer.alt.autozoneLogo