Ridgeline 2007-2008

Ignition Coil Pack

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions.
  2.  
  3. Make sure the anti-theft codes for the audio system and navigation system (if equipped) are available.
  4.  
  5. Disconnect the negative battery cable.
  6.  
  7. Remove the intake manifold cover.
  8.  
  9. Disconnect the ignition coil connectors, then remove the ignition coils.

    Click image to see an enlarged view

    Fig. View of the ignition coil connectors (A) and ignition coils (B)-front bank shown, rear bank similar

  10.  

To install:

  1. Install the ignition coils in the reverse order of removal, noting the following:
    1. Tighten the coil retaining bolts to 9 ft. lbs. (12 Nm).
    2.  

  2.  

 
label.common.footer.alt.autozoneLogo