Roadmaster 1992

Arming The System

Print

  1. Be sure the ignition switch is in the LOCK position. Remove the ignition key.
  2.  
  3. Install the AIR BAG fuse.
  4.  
  5. Connect the Connector Position Assurance (CPA) and yellow two way connector for both connectors.
  6.  
  7. Turn the ignition switch to RUN and verify that the AIR BAG indicator flashes seven times and then turns off.
  8.  
  9. If the system does not operate properly, use the GM diagnostic scan tool, or equivalent, and perform the diagnostic system check procedure. Follow the directions on the scan tool.
  10.  

 
label.common.footer.alt.autozoneLogo