Roadmaster 1992

Air Intake System

Print

Air Cleaner Element (Filter)



  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE
    Disconnecting the negative battery cable on some vehicles may interfere with the functions of the on-board computer systems and may require the computer to undergo a relearning process, once the negative battery cable is reconnected.


    NOTE
    If working near and/or around the SRS system and components, be sure to properly disable the SRS system. See disarming/arming the SRS system.

  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the air cleaner front cover.
  6.  
  7. Remove the heat tube.
  8.  
  9. Remove the air cleaner. Discard the air cleaner.

    Click image to see an enlarged view

    Fig. Air cleaner and related components (1 of 3)-1991-1993



    Click image to see an enlarged view

    Fig. Air cleaner and related components (2 of 3)-1991-1993



    Click image to see an enlarged view

    Fig. Air cleaner and related components (3 of 3)-1991-1993

  10.  

To install:


NOTE
Be sure to use new fasteners, as required.


NOTE
Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread sealer are identified. Do not use paints, lubricants or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners.

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Using the GM diagnostic scan tool or aftermarket equivalent reprogram the necessary systems and components. Be sure to follow the scan tool manufacturer-s directions.
  4.  

Removal & Installation



At this time the manufacturer does not provide removal and installation procedures for this component, refer to the illustrations as required.


NOTE
Before servicing the vehicle, refer to the Precautions Section.


NOTE
Disconnecting the negative battery cable on some vehicles may interfere with the functions of the on-board computer systems and may require the computer to undergo a relearning process, once the negative battery cable is reconnected.


NOTE
If working near and/or around the SRS system and components, be sure to properly disable the SRS system. See disarming/arming the SRS system.



Click image to see an enlarged view

Fig. Air cleaner and related components (1 of 3)-1991-1993



Click image to see an enlarged view

Fig. Air cleaner and related components (2 of 3)-1991-1993



Click image to see an enlarged view

Fig. Air cleaner and related components (3 of 3)-1991-1993


NOTE
Using the GM diagnostic scan tool or aftermarket equivalent reprogram the necessary systems and components. Be sure to follow the scan tool manufacturer-s directions.

 
label.common.footer.alt.autozoneLogo