S&T Series Blazer, Bravada, Envoy, Jimmy, Rainier, Trailblazer, Xtreme

Calipers & Wheel Cylinders

Print

Brake Caliper



Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and safely support the vehicle.
  4.  
  5. Remove or disconnect the following:

    Rear wheels
     
    Brake hose and cap line
     
    Retainers from caliper and remove caliper
     

  6.  

To install:

  1. Install or connect the following:

    Brake pads if removed
     
    Caliper over rotor, and onto mounts
     
    Retainers, and tighten to 23 ft. lbs. or (31 Nm)
     
    Brake hose, and tighten to 20 ft. lbs. (27 Nm)
     

  2.  
  3. Bleed brake system.
  4.  
  5. Install tires.
  6.  
  7. Refill the master cylinder and pump pedal to attain full brake pedal before Road-testing the vehicle.

    Click image to see an enlarged view

    Fig. Rear brake caliper-Bravada shown

  8.  

 
label.common.footer.alt.autozoneLogo