S&T Series Blazer, Bravada, Envoy, Jimmy, Rainier, Trailblazer, Xtreme

OBD I Systems


A Malfunction Indicator Lamp (MIL) labeled Check Engine Lamp or Service Engine Soon was required to illuminate and alert the driver of a fault, and the need to service the emission controls. A Diagnostic Trouble Code (DTC) was required to assist in identifying the system or component associated with the fault. If the fault that caused the MIL goes away, the MIL will go out and the code associated with the fault will disappear after a predetermined number of ignition cycles.

Following extensive research, CARB determined that by the time an Emission System component failed and caused the MIL to illuminate, that the vehicle could have emitted excess emissions over a long period of time. CARB also concluded that semi-annual or annual tailpipe tests were not catching enough of the vehicles with Emission Control systems operating at less than normal efficiency.

To take advantage of improvements in vehicle manufacturer adaptive and failsafe strategies, CARB developed new requirements designed to monitor the performance of Emission Control components, as well as to detect circuit and component hard faults. The new diagnostics were designed to operate under normal driving conditions, and the results of its tests would be viewable without any special equipment.