S&T Series Blazer, Bravada, Envoy, Jimmy, Rainier, Trailblazer, Xtreme

Torque Specifications

Print

TORQUE SPECIFICATIONS

All readings in ft. lbs.
20004.3W-77-7474--1190
  4.3X-77-7474--1190
1* NOTE: Applies to Lower Manifold only.
2- 1st pass: 22 ft. lbs.
3- 20 ft. lbs. plus 70 degrees
4- Lower intake manifold:
5- Tighten bolts to 12 ft. lbs.
6- Cylinder head bolts (14)
72 short end bolts: 62 INCH lbs.
81 long end bolt: 62 INCH lbs.
9- 18 ft. lbs., plus 180 depress
10- 18 ft. lbs., plus 110 degrees
11- 110 ft. lbs., plus 180 degrees
12- 18 ft. lbs., plus 50 degrees
13- 89 INCH lbs.
14- 1st pass: 15 ft. lbs.
15- 1st pass: 22 ft. lbs.
16- Inner bolts:
17- 15 ft. lbs. plus 75 degrees
18- Installation pass: 240 ft. lbs. (discard bolt)
19- 1st pass: 15 ft. lbs.
20- 1st pass: 44 inch lbs.
21R 1st pass: 11 ft. lbs.
22- M11 bolts: 22 ft. lbs.
23- 1st pass: 11 ft. lbs.
TORQUE SPECIFICATIONS

All readings in ft. lbs.
20014.3W-77-7474--1118
1* NOTE: Applies to Lower Manifold only.
2- 1st pass: 22 ft. lbs.
3- 20 ft. lbs. plus 70 degrees
4- Lower intake manifold:
5- Tighten bolts to 12 ft. lbs.
6- Cylinder head bolts (14)
72 short end bolts: 62 INCH lbs.
81 long end bolt: 62 INCH lbs.
9- 18 ft. lbs., plus 180 depress
10- 18 ft. lbs., plus 110 degrees
11- 110 ft. lbs., plus 180 degrees
12- 18 ft. lbs., plus 50 degrees
13- 89 INCH lbs.
14- 1st pass: 15 ft. lbs.
15- 1st pass: 22 ft. lbs.
16- Inner bolts:
17- 15 ft. lbs. plus 75 degrees
18- Installation pass: 240 ft. lbs. (discard bolt)
19- 1st pass: 15 ft. lbs.
20- 1st pass: 44 inch lbs.
21R 1st pass: 11 ft. lbs.
22- M11 bolts: 22 ft. lbs.
23- 1st pass: 11 ft. lbs.
TORQUE SPECIFICATIONS

All readings in ft. lbs.
20024.2S-------1319
  4.3X-77-7474--1118
1* NOTE: Applies to Lower Manifold only.
2- 1st pass: 22 ft. lbs.
3- 20 ft. lbs. plus 70 degrees
4- Lower intake manifold:
5- Tighten bolts to 12 ft. lbs.
6- Cylinder head bolts (14)
72 short end bolts: 62 INCH lbs.
81 long end bolt: 62 INCH lbs.
9- 18 ft. lbs., plus 180 depress
10- 18 ft. lbs., plus 110 degrees
11- 110 ft. lbs., plus 180 degrees
12- 18 ft. lbs., plus 50 degrees
13- 89 INCH lbs.
14- 1st pass: 15 ft. lbs.
15- 1st pass: 22 ft. lbs.
16- Inner bolts:
17- 15 ft. lbs. plus 75 degrees
18- Installation pass: 240 ft. lbs. (discard bolt)
19- 1st pass: 15 ft. lbs.
20- 1st pass: 44 inch lbs.
21R 1st pass: 11 ft. lbs.
22- M11 bolts: 22 ft. lbs.
23- 1st pass: 11 ft. lbs.
TORQUE SPECIFICATIONS

All readings in ft. lbs.
20034.2S-------1319
  4.3X-77-7474--1118
  5.3P-------1118
1* NOTE: Applies to Lower Manifold only.
2- 1st pass: 22 ft. lbs.
3- 20 ft. lbs. plus 70 degrees
4- Lower intake manifold:
5- Tighten bolts to 12 ft. lbs.
6- Cylinder head bolts (14)
72 short end bolts: 62 INCH lbs.
81 long end bolt: 62 INCH lbs.
9- 18 ft. lbs., plus 180 depress
10- 18 ft. lbs., plus 110 degrees
11- 110 ft. lbs., plus 180 degrees
12- 18 ft. lbs., plus 50 degrees
13- 89 INCH lbs.
14- 1st pass: 15 ft. lbs.
15- 1st pass: 22 ft. lbs.
16- Inner bolts:
17- 15 ft. lbs. plus 75 degrees
18- Installation pass: 240 ft. lbs. (discard bolt)
19- 1st pass: 15 ft. lbs.
20- 1st pass: 44 inch lbs.
21R 1st pass: 11 ft. lbs.
22- M11 bolts: 22 ft. lbs.
23- 1st pass: 11 ft. lbs.
TORQUE SPECIFICATIONS

All readings in ft. lbs.
20044.2S-------1319
  4.3X-77-7474--1118
  5.3P------R1118
1* NOTE: Applies to Lower Manifold only.
2- 1st pass: 22 ft. lbs.
3- 20 ft. lbs. plus 70 degrees
4- Lower intake manifold:
5- Tighten bolts to 12 ft. lbs.
6- Cylinder head bolts (14)
72 short end bolts: 62 INCH lbs.
81 long end bolt: 62 INCH lbs.
9- 18 ft. lbs., plus 180 depress
10- 18 ft. lbs., plus 110 degrees
11- 110 ft. lbs., plus 180 degrees
12- 18 ft. lbs., plus 50 degrees
13- 89 INCH lbs.
14- 1st pass: 15 ft. lbs.
15- 1st pass: 22 ft. lbs.
16- Inner bolts:
17- 15 ft. lbs. plus 75 degrees
18- Installation pass: 240 ft. lbs. (discard bolt)
19- 1st pass: 15 ft. lbs.
20- 1st pass: 44 inch lbs.
21R 1st pass: 11 ft. lbs.
22- M11 bolts: 22 ft. lbs.
23- 1st pass: 11 ft. lbs.
TORQUE SPECIFICATIONS

All readings in ft. lbs.
20054.2S-------1319
  5.3P-------1118
1* NOTE: Applies to Lower Manifold only.
2- 1st pass: 22 ft. lbs.
3- 20 ft. lbs. plus 70 degrees
4- Lower intake manifold:
5- Tighten bolts to 12 ft. lbs.
6- Cylinder head bolts (14)
72 short end bolts: 62 INCH lbs.
81 long end bolt: 62 INCH lbs.
9- 18 ft. lbs., plus 180 depress
10- 18 ft. lbs., plus 110 degrees
11- 110 ft. lbs., plus 180 degrees
12- 18 ft. lbs., plus 50 degrees
13- 89 INCH lbs.
14- 1st pass: 15 ft. lbs.
15- 1st pass: 22 ft. lbs.
16- Inner bolts:
17- 15 ft. lbs. plus 75 degrees
18- Installation pass: 240 ft. lbs. (discard bolt)
19- 1st pass: 15 ft. lbs.
20- 1st pass: 44 inch lbs.
21R 1st pass: 11 ft. lbs.
22- M11 bolts: 22 ft. lbs.
23- 1st pass: 11 ft. lbs.
 
label.common.footer.alt.autozoneLogo