S10 Pickup, Sonoma 2000-2004

Disarming the System

Print

  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2.  
  3. Turn the ignition switch to LOCK , remove the key, then disconnect the negative battery cable.
  4.  
  5. Remove the AIR BAG fuse from the fuse block.
  6.  
  7. Remove the steering column filler panel or knee bolster.
  8.  
  9. Unplug the Connector Position Assurance (CPA) and yellow two-way connector at the base of the steering column.
  10.  
  11. Remove the Connector Position Assurance (CPA) from the passenger yellow two-way connector located behind the glove box.
  12.  
  13. Unplug the yellow two-way connector located behind the glove box.
  14.  
  15. Connect the negative battery cable.
    NOTE
    With the AIR BAG fuse removed, the battery cable connected and the ignition in the ON position, the AIR BAG warning lamp will be ON. This is normal and does not indicate a system malfunction.

  16.  

  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2.  
  3. Turn the ignition switch to LOCK , remove the key, then disconnect the negative battery cable.
  4.  
  5. Remove the SIR fuse from the fuse block.
  6.  
  7. Raise and support the vehicle.
  8.  
  9. Remove the Connector Position Assurance (CPA) from both inflatable restraints front end discriminating sensor connectors located on the frame crossmember.
  10.  
  11. Disconnect the inflatable restraints front end discriminating sensor connectors.
  12.  

 
label.common.footer.alt.autozoneLogo