S10 Pickup, Sonoma 2000-2004

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise and safely support the rear of the vehicle securely on jackstands.
  2.  
  3. Remove the stabilizer links to stabilizer shaft nuts and bolts.
  4.  
  5. Remove the stabilizer shaft U-bolt nuts.
  6.  
  7. Remove the stabilizer shaft U-bolts and clamps.
  8.  
  9. Remove the stabilizer shaft insulators.
  10.  
  11. Remove the stabilizer shaft.
  12.  

To install:

  1. Install the stabilizer shaft to the rear axle.
  2.  
  3. Install the stabilizer shaft insulators.
  4.  
  5. Install the stabilizer shaft U-bolts and clamps.
  6.  
  7. Install the stabilizer shaft U-bolt nuts and tighten to 44 ft. lbs. (60 Nm).
  8.  
  9. Install the stabilizer shaft link to the stabilizer shaft mounting bolts.
  10.  
  11. Install the stabilizer shaft link to the stabilizer shaft nuts and tighten to 42 ft. lbs. (57 Nm).
  12.  
  13. Lower the vehicle.
  14.  

 
label.common.footer.alt.autozoneLogo