SRX 2004-2005

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the right closeout insulator panel.
  4.  
  5. Remove the instrument panel (I/P) compartment.
  6.  
  7. Disconnect the blower motor electrical connector.
  8.  
  9. Disconnect the blower motor processor electrical connector.
  10.  
  11. Remove the screws (1) that retain the blower motor.
  12.  
  13. Remove the blower motor.

    Click image to see an enlarged view

    Fig. Blower motor mounting screws (1)

  14.  

To install:

  1. Install the blower motor.
  2.  
  3. Install the blower motor screws (1) and tighten to 13 inch lbs. (1.5 Nm).

    Click image to see an enlarged view

    Fig. Blower motor mounting screws (1)

  4.  
  5. Connect the blower motor processor electrical connector.
  6.  
  7. Connect the blower motor electrical connector.
  8.  
  9. Install the I/P compartment.
  10.  
  11. Install the right closeout insulator panel.
  12.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the right closeout insulator panel.
  4.  
  5. Remove the instrument panel (I/P) compartment.
  6.  
  7. Disconnect the blower motor electrical connector.
  8.  
  9. Disconnect the blower motor processor electrical connector.
  10.  
  11. Remove the screws (1) that retain the blower motor.
  12.  
  13. Remove the blower motor.

    Click image to see an enlarged view

    Fig. Blower motor mounting screws (1)

  14.  

To install:

  1. Install the blower motor.
  2.  
  3. Install the blower motor screws (1) and tighten to 13 inch lbs. (1.5 Nm).

    Click image to see an enlarged view

    Fig. Blower motor mounting screws (1)

  4.  
  5. Connect the blower motor processor electrical connector.
  6.  
  7. Connect the blower motor electrical connector.
  8.  
  9. Install the I/P compartment.
  10.  
  11. Install the right closeout insulator panel.
  12.  

 
label.common.footer.alt.autozoneLogo