SRX 2004-2005

Removal & Installation

Print

Ignition Coil Module



4.6L Engine
Bank 1
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fuel injector sight shield.
  4.  
  5. Remove the ignition coil cover from the cam cover by lifting straight up.
  6.  
  7. Disconnect the ignition module assembly wiring harness electrical connector.
  8.  
  9. Remove the ignition module assembly retaining bolts and studs.
  10.  
  11. Carefully, remove the ignition module assembly.

    Click image to see an enlarged view

    Fig. Bank 1 ignition coil cover-4.6L engine



    Click image to see an enlarged view

    Fig. Bank 1 ignition coil module assembly-4.6L engine

  12.  

To install:


NOTE
Ensure that the spark plug seals are in place when installing the ignition module assembly.

  1. Install or connect the following:
  2.  
  3. Install the ignition module assembly.
  4.  
  5. Install the ignition module retaining bolts and studs and tighten to 89 inch lbs. (10 Nm).
  6.  
  7. Reconnect the ignition module electrical connector.
  8.  
  9. Install the ignition coil cover to the cam cover.
  10.  
  11. Install the fuel injector sight shield.
  12.  

Bank 2
  1. Remove the fuel injector sight shield.
  2.  
  3. Remove the ignition coil cover from the cam cover by lifting straight up.
  4.  
  5. Disconnect the ignition module assembly wiring harness electrical connector.
  6.  
  7. Remove the ignition module assembly retaining bolts and studs.
  8.  
  9. Carefully, remove the ignition module assembly.
  10.  

To install:


NOTE
Ensure that the spark plug seals are in place when installing the ignition module assembly.

  1. Install the ignition module assembly.
  2.  
  3. Install the ignition module retaining bolts and tighten to 89 inch lbs. (10 Nm).
  4.  
  5. Reconnect the ignition module electrical connector.
  6.  
  7. Install the ignition coil cover to the cam cover.
  8.  
  9. Install the fuel injector sight shield.
  10.  

 
label.common.footer.alt.autozoneLogo